especially when there are large axial rigidity adapt appropriate.

There are small axial load, the choice of deep groove ball bearings, angular contact ball bearing manufacturer  tapered roller bearings and self-aligning ball or spherical roller bearings; when the axial load is larger, the larger the contact angle can be used angular contact ball bearings and tapered roller bearings, or use radial bearings and thrust bearings together, which in very high axial loads or special requests, especially when there are large axial rigidity adapt appropriate.
b. Permissible speed
Because different types of bearings are very different. Generally, the friction is small, less heat bearing suitable for high speeds. Rolling in the design should strive to lower the speed limit working conditions.
c. Rigidity
Bearings under load, the bearing rings and rolling elements contact point will produce elastic deformation, the deformation is proportional to the load, the ratio determines the size of the bearing stiffness. Generally by bearing preload to improve the rigidity of the bearing; addition, the design of the bearing support, considering the combination and arrangement of the bearing can also improve the support rigidity of the bearing.
d. Aligning performance and installation errors
Bearing into the working position, it is often due to manufacturing errors caused by poor installation and positioning. At this time often due to produce fishing degree axis and thermal expansion and other reasons, the bearing to put too much load, cause early damage. Automatic self-aligning bearing can overcome defects caused by the installation error, so it is suitable for such purpose bearings.
e. Installation and Removal
Tapered roller bearings, needle roller bearings and tapered roller bearings, inner and outer rings are separable bearing type (the so-called separation of bearings), easy installation and removal.
f. Marketability
Even the inclusion of catalog bearing on the market does not necessarily have sales; Conversely, not included in the catalog of the bearing but some mass production. Thus, whether the bearing should be clear and easy to use purchased.