FAG bearings Crossed roller bearings use

Crossed roller bearings FAG, their roller between the inner ring and the outer ring, the interval crosswise arranged at right angles to each other. They can withstand the load from all directions (eg axial thrust load or momentum, etc.).
  Kunshan Bearing: Due roller in contact with the track surface into the status quo, therefore, FAG bearings under load and the elastic deformation of unlikely. FAG Bearings of this type are widely used in industrial automation, such as robots, machine tools and medical facilities, etc., need high rigidity, high speed close and still ensure accurate the occasion.
       In cross roller bearing manufacturer AG, due to cylindrical roller at 90 ° to the surface of the V-shaped groove scroll through the spacer retainer is arranged perpendicular to each other, so a cross roller bearings can bear radial load, axial load and moment load and other loads in all directions. Inside and outside the ring size is the minimum possible, in particular, is close to the limit of very thin type compact size, and high rigidity, so the most suitable for the industrial robot joints or rotating parts, machining centers rotary table, manipulator rotating parts, precision rotary tables, medical equipment, measuring instruments, IC manufacturing equipment and other purposes.Bearing outer ring and bearing holes for the tight fit, the inner ring and the shaft to a more loose fit, it can be mounted on the bearing shaft.
When TIMKEN bearing rings and the shaft or bearing bore are a tight fit, the application of a special mounting sets of barrels while the bearing pressure to the shaft or bearing housing.
When TIMKEN bearing size is larger, the larger the force required to install or heavy duty work interference with larger bearings which uses cold problems during installation, you need to advance the bearing inner ring or bearing seat heating then install it. Installed in the hot state, the heating temperature should be strictly controlled. Heating bearings, the heating temperature should not exceed 1200C, should generally be in 80 ~ 1000C. Bearings with shields or seals can not be heated, which will cause the loss of lubricant. Heating can be electric induction wives, and oil bath heating method.